MiSTer is a port of well known MiST project to a larger FPGA and faster ARM. MiSTer provides modern video output through HDMI (VGA and analog audio are still available on daughter board). It’s based on Terasic DE10-nano board. Here are some improvement over the MiST board: Based on the Altera Cyclone V SE FPGA and ARM Cortex A9 dual-core CPU at 800MHz and DDR3 1GB. MiSTer scales original video resolution to a standard HDMI resolution (usually 1280x720p60), so you don’t need to look for some ancient monitor with VGA input supporting non-standard resolution and frame rates. For purists VGA is still available and it outputs original video resolution. There is a port of the minimig core to the MiSTer board. minimig (short for Mini Amiga) is an open source re-implementation of an Amiga using a field-programmable gate array (FPGA). Original minimig author is Dennis van Weeren. The minimig-MiSTer variant in this repository has been upgraded with AGA chipset capabilites, which allows it to emulate the latest Amiga models (Amiga 1200, Amiga 4000 and (partially) Amiga CD32). Ofcourse it also supports previous OCS/ECS Amigas like Amiga 500, Amiga 600 etc.